美高梅手机登录-美高梅手机版登录4858

7*24Hours for you

15967710202/0577-66081118

Equipment applicationCurrent Position:Home PageTransportation industry products and equipment

Selection of polyurethane equipment

Automobile cushion, cushion production can choose automobile cushion, cushion two-component low-pressure foam machine, automobile cushion, cushion two-component high-pressure foam machine and automobile cushion, cushion disc line. The picture of the machine is as follows:



Automobile cushion and cushion two-component low-pressure foaming machine is a new product independently developed by linxin company, which has the characteristics of high repeat injection accuracy, even mixing, stable performance, simple operation and high production efficiency.

Application: this model is suitable for production of automobile cushion, cushion and other products.

Equipment technical parameters:


Item/model

total spit out quantity

(g/s)

total power(kw)

Head stirring speed(r/min)

mix proportion

Overall dimensions

(length X width X height)


height(kg)

soft

bubble


RR2-700

125-700g

11

5200

100:50-150

2200*1400*2300

1000


Car cushion, cushion for leaning on of two components, high pressure foaming machine is liquid polyols and isocyanates two components of the raw materials are stored in two material storage tank, with two rotating axial plunger metering pump (radial) sent to the mixed system, under the action of hydraulic mixing head open, two components was injected into the small mixing chamber with a high speed, high speed collision and mixing effect, make the material liquid evenly, mixing effect is good, no clean, stable performance, easy operation, achieve the goal of high production efficiency and environmental protection.

Application: this model is suitable for production of automobile cushion, cushion and other products.

Equipment technical parameters:


Item/model

H2-L25

Spit out quantity(g/s)

90-400g/s

A tank capacity(L)

250/500

B tank capacity(L)

250/500

injection pressure(mpa)

5-15

inject time(S)

0.5-99.99

total power(kw)

26

height(kg)

1800


Automobile cushion, cushion disc line used for all kinds of automobile cushion, cushion continuous foam production. The equipment operates at a constant speed, and the running speed can be adjusted to the production beat. The disk is equipped with a power supply and air source conveying system. It forms a complete foaming production line with mould frame and mould temperature machine.

Equipment application: this production line is suitable for producing automobile cushion, cushion and other products.

Equipment features:

Continuous cycle operation, simple operation, smooth transmission, high production efficiency.

Equipment technical parameters:


Disc diameter (m)

4

5

6

7

8

9

10

11

12

13

14

15