美高梅手机登录-美高梅手机版登录4858

7*24Hours for you

15967710202/0577-66081118

company newsCurrent Pocation:homecompany news

Polyurethane foam machine foam material isocyanate accidentally splash into the

Polyurethane foam machine foam material isocyanate accidentally splash into the skin how to do


Polyurethane foaming machine early operation is dependent on the material is pu combination of black and white material application. Must be careful when operate. Especially in the operation of the isocyanate, should pay special attention to, because it has certain stimulating, don't inhale the steam, and don't splash into the skin and eyes. One thousand has a leak and contact we also should be timely treatment. The specific measures are as follows:


  

When the skin comes into contact with the composite polyether, rinse with soap and water.


Splash to the skin and eyes, must immediately use sanitary cotton to wipe it off, and then wash with a lot of water for 15 minutes, and then wash with soap or alcohol, if still more serious, should immediately diagnosis and treatment;

Polyurethane foaming machine

  

Large area isocyanate sprinkle the ground, the application of sand, wood chips for covering treatment, and then wash the ground with a lot of water;


When the clothes are contaminated with isocyanate, the solution containing 50% ethanol, 45% water and 5% concentrated ammonia solution must be used for treatment, and then washed with soap.